AKEDA

Home > AKEDA

Akeda 3224 24-Inch Blanket Chest BC24 Window

Akeda 3224 is a 24-Inch Blanket Chest Jig Window. The package has one replacement high impact Lexan window for Akedarsquo;s model BC24 Jig. It snaps into place without special tools. Remove the protective film from both sides before installing.

Akeda 3424 24-Inch Ribbed Rear Guide Rail

Akeda 3424 is a 24-Inch Blanket Chest Rear Guide Rail. The package has one replacement ribbed 9/16-Inch thick rear guide rail for Akedas Model BC24 Blanket Chest Jig. To replace your guide rail remove the two mounting screws remove the damaged guide rail and then install the replacement. Always tighten the left hand guide rail screw first.

Akeda 3418 16-Inch Ribbed Drawer Construction Front Guide Rail

Akeda 3418 is a 16-Inch Drawer Construction Front Guide Rail. The package has one replacement ribbed 9/16-Inch thick front guide rail for Akedas Model DC16 Drawer Construction Jig. To replace your guide rail remove the window remove the two mounting screws remove the damaged guide rail then install the replacement. Always tighten the left hand guide rail screw first.

Akeda 3230 Half Blind Pin Guides

Akeda 3230 is a set of Half Blind Pin Guides. The package includes five pin guides used to form half blind dovetails and box joints. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3417 16-Inch Ribbed Drawer Construction DC16 Rear Guide Rail

Akeda 3417 is a 16-Inch Drawer Construction Rear Guide Rail. The package has one replacement ribbed 9/16-Inch thick rear guide rail for Akedas Model DC16 Drawer Construction Jig. To replace your guide rail remove the two mounting screws remove the damaged guide rail and then install the replacement. Always tighten the left hand guide rail screw first.

Akeda 3522 0.434-Inch Precision Undersized Guide Bushing

Akeda 3522 is a 0.434-Inch Undersized Guide Bushing. The high precision thin-wall Akeda guide bushings are accurate to within 0.001. They replace the oversize and undersize router bits. This is a better idea from Akeda and allows greater adjustment for fit.

www.powertoolsguru.com Power Tools Guru | A power tool is a tool powered by an electric motor