Saw Blades | Accessories

Home > Accessories > Saw Blades

Pages
1 2 3 4 5 6

Tenryu PRF-35572DP 14-Inch 72T Steel-Pro Series Carbide-Tipped Saw Bla

Cut ferrous metals (mild steel) faster cleaner and easier with the Tenryu PRF-35572DP Steel-Pro Blade. Save time money the environment and your respiratory health. Tenryus complete series of steel cutting saw blades called quot;Steel-Proquot; makes light work out of all kinds of mild steel: steel studs steel sheet steel pipe channel threaded rod and much much more. Specially formulated C-6 carbide grade combined with a unique tip design resists breakage on impact and lasts longer- much longer than standard carbides or abrasive discs. Special tooth geometry with quot;insertedquot; tooth design greatly improves security of the tip efficiency and durability. Abrasive discs throw sparks and lots of dust including unhealthful fiberglass. You shouldnt be breathing it in! Steel-Proreg; blades reduce spark production and eliminate abrasive wheel dust. Abrasive discs wear quickly requiring frequent blade changes. Steel-Proreg; blades allow you to keep working; eliminating down time for frequent blade changes. In addition Steel-Proreg; cuts 5 to 10 times faster than abrasives. Typically one Steel-Proreg; blade will outlast somewhere between 15 to 30 abrasive blades. Think of all that non-productive quot;down timequot;. Abrasive discs leave a sharp burr at the cutting edge that must be removed later. Steel-Proreg; blades cut clean; eliminating this extremely time-consuming after-cut process. quot;Time is moneyquot;. Steel-Proreg; saves BOTH!

Rockwell RW9018 1-1/8-inch Universal End Cut Blade for SoniCrafter

The Rockwell RW9018 1-1/8-Inch Universal End Cut Blade works in conjunction with the Rockwell SoniCrafter for plunge cutting in a variety of materials. The RW9018 is ideally-suited for use in wood plastics and even non-ferrous metals. This Universal End Cut Blade is perfect for use in tight spaces that other saws cannot reach.Features:Cuts up to 1-5/8-inch deep and 1-1/8-inch wideHardened teeth will cut non-ferrous metalsWhats In The Box:Rockwell RW9018 1-1/8-Inch Universal End Cut Blade for the SoniCrafter

Rockwell RW9120 3-1/8-inch High-Speed Steel Semicircle Saw Blade for S

The Rockwell RW9120 3-1/8-Inch High-Speed Steel Semicircle Saw Blade works in conjunction with the Rockwell SoniCrafter for linear and plunge cutting in a variety of materials. The RW9120 is ideally-suited for use in wood and plastics. This High-Speed Steel Saw Blade is perfect for cutting in corners and flush against adjacent surfaces.Features:Flat on one side so you can cut into corners and flush against adjoining surfacesWhats In The Box:Rockwell RW9120 3-1/8-Inch High-Speed Steel Semicircle Saw Blade for the SoniCrafter

Rockwell RW9127 2-1/2-inch Diamond-Coated Saw Blade for SoniCrafter

The Rockwell RW9127 2-1/2-Inch Diamond-Coated Saw Blade works in conjunction with the Rockwell SoniCrafter for scoring and cutting in a variety of materials. The RW9127 is ideally-suited for use on ceramic and stone tile as well as backerboard. This Diamond-Coated Saw Blade is perfect for use in tile replacement or installation applications.Features:For use on ceramic and stone tile and backerboardWhats In The Box:Rockwell RW9127 2-1/2-Inch Diamond-Coated Saw Blade for the SoniCrafter

Rockwell RW9128 2-1/2-Inch Diamond-Coated Semicircle Saw Blade for Son

The Rockwell RW9128 2-1/2-Inch Diamond-Coated Semicircle Saw Blade works in conjunction with the Rockwell SoniCrafter for scoring and cutting in a variety of materials. The RW9128 can also remove grout cut and shape plaster porous concrete and masonry. The RW9128 is ideally-suited for use on ceramic and stone tile as well as backerboard. This Diamond-Coated Semicircle Saw Blade is flat on one side to make it easy to cut into corners and flush against adjacent surfaces.Features:For use on ceramic and stone tile and backerboardPerfect for use in tile replacement or installation applicationsWhats In The Box:Rockwell RW9128 2-1/2-Inch Diamond-Coated Semicircle Saw Blade for the SoniCrafter

Rockwell RW9173K 6-Piece End Cut Blade Set for SoniCrafter

The Rockwell RW9173K End Cut Blade Set works with the Rockwell SoniCrafter for plunge cutting in a variety of materials. The RW9173K contains two each of the 1-3/8-inch End Cut Blades Universal End Cut Blades and Precision End Cut Blades. Tha blades in the RW9173K are great for cutting in tight spaces that other saws cant reach.Features:End Cut Blades are ideal for use in non-metal materials like wood and plasticsUniversal End Cut Blades have hardened teeth for use in wood plastics and even non-ferrous metalsPrecision End Cut Blades have a precision-ground beveled tooth design that allows for aggressive plunge cutting in woodEach blade is 1-3/8-inch wide with up to 1-5/8-inch cutting depthWhats In The Box:Two 1-3/8-Inch End Cut Blades - RW9121Two 1-3/8-Inch Universal End Cut Blades - RW9122Two 1-3/8-Inch Precision End Cut Blades - RW9123

Pages
1 2 3 4 5 6

www.powertoolsguru.com Power Tools Guru | A power tool is a tool powered by an electric motor