Nailers | Air Tools |
|||
| |||
|
Pages DeWalt D51238K Factory Reconditioned Heavy-Duty 18 Gauge 2 inch Brad Nailer Kit, 70-120 PSI, 110 Nails The DeWalt D51238K is a Factory Reconditioned Heavy-Duty 18 gauge 2 inch Brad Nailer Kit. The DeWalts D51238 heavy-duty 18 gauge pneumatic brad nailer is built to last with many innovative features that save time and money on the job site. The 18-gauge tool holds 110 nails from 5/8 inch to 2 inch long and has enough power for even the hardest woods. In softer materials users can quickly adjust the nail depth and lock it in with an innovative vertical slide that has four indexed positions. It has a durable tool-free, front latch, jam-clearing mechanism that will not wear out over the life of the nailer. Air exhaust is channeled away from the user with a tool-free 360 adjustable exhaust setting. DeWalt D51256K Factory Reconditioned 1-1/4 inch - 2-1/2 inch Finish Nailer Kit, 16 Gauge, 70-120 PSI The DeWalt D51256 is a heavy-duty 16 Gauge finish nailer. It weighs 3.9 lbs and holds up to 160 1-1/4 inch to 2-1/2 inch nails, more than any other nailer in its class. It is the only 16 Gauge finish nailer to use a rear-loading magazine system with DeWalts exclusive lock and load or load and lock design for faster loading and unloading. Quick adjustment of nail depth with an innovative vertical slide which has five indexed positions can be done. Air exhaust is channeled away from the user with a tool-free 360 adjustable exhaust cap. Porter-Cable CFNBNS Factory Reconditioned Three Nailer/Compressor Combo Kit The Porter-Cable CFNBNS is a Factory Reconditioned Combo Kit, which includes a Finish Nailer, Brad Nailer, Stapler, and Compressor.The 150-PSI Porter-Cable compressor with two couplers works on standard household current. Besides driving a large quantity of nails in a single tank charge, the 6-gallon compressor proves useful for other pneumatic tools as well. The two quick connect couplers allow two nail guns to powered at the same time. Besides being quick on recovery, it is also oil-free and maintenance free. This portable compressor weighs just 34 pounds and has a handle on top for easily moving it around.The hardened driver blade ensures maximum durability and reliability for the Porter-Cable nailer. The special design of the tool-free jam release affords a clear line of sight and cuts down on interruptions. The nailers depth of drive can be easily adjusted and the nose tip does not mar the work surface. Die-cast aluminum used in the construct of the body makes the nailer lightweight for extended hours of use and yet strong enough to withstand the harsh jobsite treatment. The Porter-Cable stapler is sturdy and responsive, and does well for upholstery and other furniture coverings etc. Porter-Cable RN175A Factory Reconditioned 7/8 inches to 1-3/4 inches Coil Roofing Nailer, 70 - 120 PSI The Porter-Cable RN175A is a Factory Reconditioned 7/8 inches to 1-3/4 inches Coil Roofing Nailer. The tool has a collated clipped head and nail length specifications to meet the roofing and nailing demands of any project. The new rounded body style offers increased comfort and the overall design has doubled the life of tool. The RN175A has a new rubber grip for increased ergonomics and aesthetics. The new roofing nailer has a selectable trigger that works in either restrictive or contact mode, which does not require any tools or other mechanism to switch from restrictive to contact mode. The RN175A uses 15 3/4 inches to 1-3/4 inches wire collated roofing nails. Porter-Cable FR350A Factory Reconditioned 3-1/2 inch Round-Head Framing Nailer Kit, 70-120 PSI The Porter-Cable FR350A Factory Reconditioned 3-1/2 inch Round-Head Framing Nailer Kit is ideal for finishing, framing, sheathing and sub flooring. The versatile Porter-Cable FR350A uses 22 degree plastic collated round-head framing nails with size ranging from 2 inch to 3 1/2 inch x 0.113 inch to 0.148 inches. The magazine capacity of 64 nails ensures longer run without worrying about frequent reloading. It is also equipped with a nail lockout mechanism that alerts whenever the tool has to be reloaded, thus avoiding any false shot. Being a factory-reconditioned product, this nailer kit has undergone multiple quality checks; therefore its superior performance is assured. The nailer kit also features a tool-free adjustable exhaust to divert the gush of air, released when shot, away from the user or anyone close by. The compact body design of Porter-Cable FR350A provides the balance while in use. The nailer has the power to drive up to 3-1/2 x 0.131 inch nails into engineered lumber, making nailing a breeze. The Porter-Cable FR350A Factory Reconditioned 3-1/2 inch Round-Head Framing Nailer Kit weighs 16 lbs, and delivers from 70 – 120 PSI. Porter-Cable FC350A Factory Reconditioned 2 inches - 3-1/2 inches Clipped Head Framing Nailer Kit, 70 - 120 PSI The Porter-Cable FC350A is a Factory Reconditioned 2 inches to 3-1/2 inches Clipped Head Framing Nailer Kit. It has a collated clipped head and nail length specification to meet the nailing demands of any project. The new rounded body style offers increased comfort and the overall design has doubled the life of tool. The FC350A uses 30 to 34 paper collated clipped head framing nails 2 inches to 3-1/2 inches long. Pages |
Air Tools