Dovetail Jigs

Home > Dovetail Jigs

Pages
1 2 3

Akeda 3207 7 Degree Through Dovetail Pin Guides

Akeda 3207 is a set of 7 Degree Through Dovetail Pin Guides. The package includes five 7ordm; pin guides used to form through dovetails in material from 3/4rdquo; down to 1/4rdquo; thick with the matching angle 7ordm; bit. The 7ordm; angle is the only choice for material 3/4rdquo; thick. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3209 9 Degree Through Dovetails Pin Guides

Akeda 3209 is a set of 9 Degree Through Dovetail Pin Guides. The package has five 9ordm; pin guides used to form through dovetails in material from 5/8-Inch down to 1/4-Inch thick with the matching angle 9ordm; bit. The 9ordm; angle is better suited to material 5/8-Inch thick. It is stronger than the 7ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3211 11 Degree Through Dovetails Pin Guides

Akeda 3211 is a set of 11 Degree Through Dovetail Pin Guides. The package includes five 11ordm; pin guides used to form through dovetails in material from 1/2-Inch down to 1/4-Inch thick with the matching angle 11ordm; bit. The 11ordm; angle is better suited to material 1/2-Inch thick. It is stronger than the 9ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3220 20 Degree Through Dovetails Pin Guides

Akeda 3220 is a set of 20 Degree Through Dovetail Pin Guides. The package has five 20ordm; pin guides used to form through dovetails in 1/4-Inch thick material with the matching angle 20ordm; bit. The 20ordm; angle is better suited to material 1/4-Inch thick. Itrsquo;s stronger than the 14ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Porter-Cable 430D3PC Omnijig Joinery System Dovetail Bit - D3

The Porter Cable 430D3PC is a D3 Dovetail Bit for the Omnijig Joinery System. It is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut standard through dovetails with narrow pins on up to 3/4 thick wood and standard variable-spaced half-blind dovetails on up to 5/8 thick wood. The angle is set to 7° to enable the user to replicate traditional hand cut dovetail joints.

Akeda 3214 14 Degree Through Dovetails Pin Guides

Akeda 3214 is a set of 14 Degree Through Dovetail Pin Guides. The package has five 14ordm; pin guides used to form through dovetails in material from 3/8-Inch down to 1/4-Inch thick with the matching angle 14ordm; bit. The 14ordm; angle is better suited to material 3/8-Inch thick. It is stronger than the 11ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Pages
1 2 3

www.powertoolsguru.com Power Tools Guru | A power tool is a tool powered by an electric motor