AKEDA | Dovetail Jigs

Home > Dovetail Jigs > AKEDA

Pages
1 2

Akeda 3207 7 Degree Through Dovetail Pin Guides

Akeda 3207 is a set of 7 Degree Through Dovetail Pin Guides. The package includes five 7ordm; pin guides used to form through dovetails in material from 3/4rdquo; down to 1/4rdquo; thick with the matching angle 7ordm; bit. The 7ordm; angle is the only choice for material 3/4rdquo; thick. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3209 9 Degree Through Dovetails Pin Guides

Akeda 3209 is a set of 9 Degree Through Dovetail Pin Guides. The package has five 9ordm; pin guides used to form through dovetails in material from 5/8-Inch down to 1/4-Inch thick with the matching angle 9ordm; bit. The 9ordm; angle is better suited to material 5/8-Inch thick. It is stronger than the 7ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3211 11 Degree Through Dovetails Pin Guides

Akeda 3211 is a set of 11 Degree Through Dovetail Pin Guides. The package includes five 11ordm; pin guides used to form through dovetails in material from 1/2-Inch down to 1/4-Inch thick with the matching angle 11ordm; bit. The 11ordm; angle is better suited to material 1/2-Inch thick. It is stronger than the 9ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3220 20 Degree Through Dovetails Pin Guides

Akeda 3220 is a set of 20 Degree Through Dovetail Pin Guides. The package has five 20ordm; pin guides used to form through dovetails in 1/4-Inch thick material with the matching angle 20ordm; bit. The 20ordm; angle is better suited to material 1/4-Inch thick. Itrsquo;s stronger than the 14ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3214 14 Degree Through Dovetails Pin Guides

Akeda 3214 is a set of 14 Degree Through Dovetail Pin Guides. The package has five 14ordm; pin guides used to form through dovetails in material from 3/8-Inch down to 1/4-Inch thick with the matching angle 14ordm; bit. The 14ordm; angle is better suited to material 3/8-Inch thick. It is stronger than the 11ordm; angle and forms a more slender aesthetically-pleasing pin profile. When installing guide fingers for the first time they may be a little stiff. They are deliberately made slightly oversize so they shave down to size.

Akeda 3250 Half Blind Dovetail Pin Stops

Akeda 3250 is a set of Half Blind Dovetail Pin Stops. The package has a left hand and right hand pair of half blind pin stops. Install them in place of the two outboard half blind dovetail pin guides to act as adjustable stops when installing a half blind pin piece.

Pages
1 2

www.powertoolsguru.com Power Tools Guru | A power tool is a tool powered by an electric motor