Lasers

Home > Lasers

Pages
1 2

CST 57-AL500HVI Hor/Vert Elec Self-Lev Rot Laser Interior

The CST/Berger 57-AL500HVI is a Horizontal/Vertical Electronic Self-Level Rotary Laser Interior. The AL-500H is fully electronic self-leveling (plusmn;5deg;) and provides accuracy of up to 1/8-in at 100-ft (3.2mm at 30m) with a working range of 1 000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 ldquo;AArdquo; Alkaline batteries.

Johnson 40-6184 Three Beam Mag. Torpedo Laser with Base

Three 90° beams emit simultaneous level plumb and square reference pointsFour vials read plumb level 45° and cross-check vial for more accurate levelingPrecision crafted anodized machined aluminum frame for superior Accuracy and durabilityStrong magnetic base tripod mount and v-groove frame for maximum versatility

Bosch DLR165K Digital Laser Rangefinder Kit

The Bosch DLR165K is a Digital Laser Rangefinder Kit. It has four measuring reference points - Back front swing-out extension pin for measuring from inside corners or channels or center of optional tripod. It features the precision laser measuring technology in which the laser beam does both pointing and measuring. The indirect length measurement mode calculates inaccessible distances that cannot be measured directly due to obstruction or lack of reflecting surface using Pythagorean theorem (a2 b2 c2).

Bosch GRL145HV Rotary Laser Kit

Precision Made SimpleElectronic Horizontal and Vertical Leveling - Ensures accuracy and eliminates set up timeBeam Customization - 0-lengths (0ordm; 20ordm; 45ordm; 90ordm; and 180ordm;) and 3 rotation speed (120 450 800 RPM) settings for diverse application and lighting conditionsEasy Field Recalibration - Maintain accuracy and prevent downtimeElectronic Horizontal and Vertical Sloping up to /- 5ordm;Vertical (Laydown) Jobs - Vertical self-leveling allows rotary laser to be positioned in laydown for vertical applicationsSquaring Plumb/Laser Point on Top of Unit - Projects at 90deg; plusmn;10 seconds relative to the main beamRobust Housing - Water and dust proof (IP54)RCR2 Laser Receiver with built-in Remote Control - Radio-frequency remote allows for control of all functions500-ft RCR2 RF Remote Range - No direct line of sight required and obstructions are no problemLimited 3-Year WarrantyLCD Display on Both Sides of RCR2 for easy beam location readout

DeWalt DW7187 Miter Saw Laser System

The DW7187 Adjustable Miter Saw Laser System was designed for the professional miter saw user and will only fit the DeWalt DW715 DW716 DW717 amp; DW718 12-inch Miter Saws. The laser module mounts on the upper guard of the miter saw and the power supply which delivers the ability for the laser to be turned on and off independent of blade rotation mounts behind the saws handle. The laser is encased in a durable protected housing designed to meet the demands of the jobsite and shop.Features:Adjustable laser line allows user to adjust line to the left or right side of bladeOn/Off switch allows laser to operate with or without blade spinningProtected laser diode in optimum location delivers long-term durability while keeping laser diode clear and visibleBright laser line delivers enhanced visibility in low and high light locationsUpper guard mount location line visibility through entire range of motionPowered by the saw (no batteries)Easy to install and calibrate: Installs in about 10 minutesDesigned exclusively for use on the DW713 DW715 DW716 DW717 and DW718 DEWALT miter saws and will not fit any other DEWALT miter saw or any other miter saw brandWhats In The Box:DeWalt DW7187 Adjustable Miter Saw LaserPower supplyLaser moduleAdjustment wrench

Bosch GPL5C 5-Point Alignment Self-Leveling Laser

The Bosch GPL5C 5-Point Alignment Self-Leveling Laser is ideal for wall and partition alignment. In addition to the five laser dots the GPL5C Laser projects plumb level and square points providing easy single-set up track alignment on both the floor and ceiling eliminating the need for two set up points for track alignment which helps to save you time and increases accuracy.Features:Three diodes project highly visible laser lines from all points for superior accuracyBuilt in magnets allow for quick alignment on metal tracksFive laser dots for wall and partition alignmentProjects plumb level and square points for cross alignment lines on floor and ceiling which eliminates the need for two set up points which saves time and increases accuracy.Selection Switch - To choose between laser options of: 3 horizontal points for 90-degree alignment and leveling; up and down cross points with 90-degree horizontal point; 5 points with cross points - meets all job needs and save battery lifeSmart pendulum leveling system self-levels senses and indicated out-of level condition and locks when switched offWhats In The Box:Bosch GPL5C Cross Point Technology 5-Point Alignment Self-Leveling LaserBelt PouchFour AA Batteries

Pages
1 2

www.powertoolsguru.com Power Tools Guru | A power tool is a tool powered by an electric motor