Drills | Power Tools |
|||
| |||
|
Home > Power Tools > Drills
Pages Makita HP2050F Factory Reconditioned 3/4 inch Hammer Drill with L.E.D. Light, 6.6 Amps, 58000 BPM The Makita HP2050F is a Factory Reconditioned 3/4 inch Hammer Drill with L.E.D. Light. It features a built-in shock-proof, high output, white L.E.D. light which illuminates drilling edge and increases visibility with a bulb that never needs replacing throughout the life of the tool. A trusty positive stop locks into either mode which avoids slipping out of gear. The drill also features a large trigger switch and 360 swivel side handle for added comfort and adaptability. It has ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue. The air vent holes supply required ventilation while protecting motor from dust and dirt. Bosch 11247 Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer, 400 RPM, 10.0 Amps The Bosch 11247 is a Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer. The tough new spline drive combination hammer offers dual mode operation for hammering with or without rotation. It features a 10 Amp motor that provides 400 RPM and 3000 BPM and delivers 5.2 ft-lbs of energy with each impact. It has an integrated clutch to help minimize torque reaction and Vario-Lock positioning that rotates and locks chisels into 12 different positions to optimize the working angle. The hammer is 17-1/4 inches in length, weighs 13.6 lbs and has a maximum bit size of 1-9/16 inches. Bosch 11236VS Factory Reconditioned 1-1/8 inch 3-Mode SDS Plus Rotary Hammer, 0-850 RPM, 7.5 Amps The Bosch 11236VS is a factory reconditioned 1-1/8 inch 3-Mode SDS plus rotary hammer. The 7.5 Amps hammer runs on a variable-speed 0 to 850 RPM motor with 0 to 3900 BPM. The hammers Vario-Lock positioning enables the user to rotate and lock the chisel into 36 different positions to optimize the working angle. The unit features 3 operational modes for versatility hammer only, for light chipping applications with chisels; rotation only, for drilling wood, steel and building materials with optional chuck; and hammer/rotation, for drilling concrete, brick, stone and masonry. The tools maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, 1-1/4 inches in woodland 4 inches in thin-wall core bit. It includes 360 auxiliary handle, depth gauge and carrying case. DeWalt DW511 Factory Reconditioned Heavy-Duty 1/2" Variable Speed Reversible Single Speed Hammer Drill, 0-2700 RPM, 6.7 Amps DeWalt DW511 factory reconditioned heavy-duty 1/2 variable speed reversible single speed hammer drill. The DW511 1/2 hammer drill/drill provides versatility for wood, steel and masonry applications. The tool is equipped with a powerful 6.7 Amp motor for greater overload protection. Light weight (3.85 lbs) ensure minimal user fatigue. The variable-speed, two-finger rubber trigger increases comfort and control, as does the 360 side handle. The tool runs from 0 to 2700 RPM and 0 to 46000 BPM. It includes side handle, chuck key and depth rod. DeWalt D25940K Factory Reconditioned Heavy-Duty 3/4" Hex Demolition Hammer Kit, 1620 BPM, 15.0 Amps DeWalt D25940KR is a factory reconditioned demolition hammer kit is very durable, comfortable and easy to use. It is powered by a 15 Amp motor for longer life. The 26 lbs hammer is the most durable hammer in its class, lasting up to 25 % longer than the nearest competitor. Armed with features as spring-loaded dust seals and non-air pumping beat piece, the hammer will stand up to the toughest job site. It produces 1620 BPM with 22 ft-lbs of impact energy. The active vibration control (AVC), produces the lowest amount of vibration in its class. Due to the compact inline design, it can be used in horizontal or vertical applications and the large rear handle has enough room to use one or two hands. The chisel can be quickly adjusted 360 in a one-step process. The lock-on/off rocker switch can be easily operated with one finger. DeWalt DW130V Factory Reconditioned Heavy-Duty 1/2" Spade Handle Drill, 0-550 RPM, 9.0 Amps The DeWalt DW130V factory reconditioned spade handle drill has powerful 9.0 Amp motor for rugged applications where high torque is required, such as mud mixing. The side and rear handles are adjustable so the user can move them to ensure proper leverage. The spade handle design of drill makes it handy for drilling applications that require downward pressure. Pages |
