Reconditioned Tools | Power Tools

Home > Power Tools > Reconditioned Tools

Pages
1 2 3 4 5 6

Makita JR3060T Factory Reconditioned Variable Speed Reciprocating Saw

Long 1-1/4 Stroke for Faster CuttingVariable speed for precise cutting in a wide variety of materialsTool-less blade change and shoe adjustmentLong 1-1/4 stroke for faster cuttingPowerful 12 AMP motor for continuous operationAll ball and needle bearings for longer tool lifeExternally accessible brushes for easy maintenance

Porter-Cable 314 Factory Reconditioned 4-1/2 inch Trim Saw

This worm gear driven trim saw provides smoothness and durability that cant be beat. The rugged worm gear transmits power smoothly to the blade because the gears have the same amount of surface area contact at all times. The 4.5 amp ball bearing motor turns at 4 500 rpm to quickly power through all plywoods paneling and 1-by lumber. It will cut 1-5/16 inches deep at 90 degrees and 1-1/16 inches at 45 degrees.Features:* Rugged worm gear drive* 100% ball bearings* Cuts 1-5/16-inches at 90-degrees amp; 1-1/16-inches at 45-degreesSpecifications:* Motor: 120 VAC 25-60 HZ/120 VDC* Amps: 4.5 AC/DC Amps* Speed: 4500 RPM* Blade Diameter: 4-1/2-Inches* Arbor: 3/8-Inch* Capacity at 45deg; Cut: 1-1/16-Inches* Capacity at 90deg; Cut: 1-5/16-Inches* Length: 11-Inches* Width: 5-Inches* Height: 6.25-Inches* Weight: 7-PoundsWhats In The Box:* Porter-Cable 314R 4-1/2-Inch Trim Saw* 20T Carbide-Tipped Riptide Blade* Blade wrench* Knob* Basic Insert

DeWalt D25113K Factory Reconditioned 1 inch SDS Pistol Grip 3 Mode Ham

The DeWalt D25113K is a Factory Reconditioned Heavy-Duty 1 inch SDS Pistol Grip 3 Mode Hammer. It features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. The rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for the hammer in concrete is 5/32 inch - 5/8 inch. The reverse feature assists in the removal of fasteners. The tools variable speed is used for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden high torque reactions if the bit jams. The 360deg; side handle adjusts easily for preference or use in tight spaces.

DeWalt DW317K Factory Reconditioned Variable-Speed Compact Jig Saw Kit

The DeWalt DW317KR Factory Reconditioned DW317K Variable-Speed Compact Jig Saw Kit is user-friendly with its quick and compact design. The DW317K features a beefy 5-1/2-amp motor for fast cuts even in the hardest materials. From thin-gauge metals to plastics to hardwoods this Jig Saw gets the job done in a short time. The DW317K has a keyless blade change that results in less downtime and increased productivity.Features:Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft5.5-amp motor deliver powerful cuts in the hardest materialsVariable speed delivers 0 - 3 100 strokes per minute for optimal cutting speedFour-position orbital action allows for faster more aggressive cuts in a variety of materialsAll-metal gear case provides superior durability on a professional siteShoe bevels 0 to 45 degrees for beveled cutsWhats In The Box:DeWalt DW317R Variable-Speed Compact Jig SawHeavy-Duty Kit Box

Makita 5007MG Factory Reconditioned 7-1/4-Inch Magnesium Circular Saw

The Makita 5007MG is a Factory Reconditioned 7-1/4 inch Magnesium Circular Saw. The magnesium components create a lightweight saw (10.1 lbs) which is tough. The circular saw features a large cutting capacity (2-1/2 inch at 90deg;) and bevel capacity (0-56deg;) with positive stops at 22.5deg; and 45deg;. The saw also features two built in LED lights and dust blower which provide greater cutting line visibility. The blade wrench is attached to the saw for fast and convenient blade changing.

Makita JR3050T Factory Reconditioned 9 Amps Reciprocating Saw (Variabl

The Makita JR3050T is a Factory Reconditioned 9 Amps Reciprocating Saw. The powerful 9.0 Amp motor rips through materials with ease. The Tool-Less blade change makes blade changing and shoe adjustment a breeze. Variable speed for precise cutting and a long 1-1/8 inch stroke makes for faster cutting. All ball and needle bearings for longer tool life and externally accessible brushes for easy maintenance.

Pages
1 2 3 4 5 6

www.powertoolsguru.com Power Tools Guru | A power tool is a tool powered by an electric motor