Welding Machines | Welding |
|||
| |||
|
Home > Welding > Welding Machines
Hobart Welders 500304A Factory Reconditioned IronMan 210 MIG & Flux Cored 210 Amp Welder An economical all-in-one MIG machine that is both versatile and portable, the IronMan 210 has outstanding arc characteristics from excellent short arc performance to an easy-to-control weld puddle. Welds 22 gauge to 3/8 steel. The IronMan 210 easily runs aluminum - just add the optional Spool mate 3035 spool gun and 207642 Switch Kit, and it will be ready to weld aluminum from 14 gauge to 1/4. Hobart Welders 500437B Factory Reconditioned AirForce 250 Plasma Cutter, 60 PSI Hobart Welders 500437 is one powerful plasma cutter apt for Cutting conductive materials and sheet metal. The Hobart Welders 500437 can cut through all conductive materials. With an in-built piston driven air compressor the device can be used straight out of the box. Its non-stick drag shield makes cutting easy and smooth. The pilot arc can be controlled using a seven-tap voltage control to cut metals, perforated metals, and painted or coated metals without retriggering the gun. Besides adding versatility to the tool, this also make the tool easy to use as one does not need to turn the tool off and change the setting along with the change in the cutting material. The shape of the bead and penetration can be precisely adjusted with a wire speed control. The Hobart Welders 500437 comes with a set of diagnostic lights that can be used for troubleshooting. Hobart Welders Champion 500433A Factory Reconditioned 10,000 Watt Generator & DC Welder A 10,000-watt generator or a 230-amp constant-current DC welder, the Champion 10,000 is ideal for farm, general construction, and emergency power applications. This unit is designed for Stick welding with quick and easy arc starts. It also performs general scratch start DC TIG. Hobart Welders 500434A Factory Reconditioned "A" Unit Champion 10,000 Generator & DC Welder Hobart Welders 500434A Champion 10,000 DC Welder runs on a 10,000-watt generator or 230 Amp constant DC current. With fuel-efficient Kohler gasoline engine running at 3600 rpm, the Hobart welder ensures quick welding consuming fuel efficiently. . The Champion 10,000 is apt for Stick welding in most farming, general construction, and emergency power applications. The DC weld output ensures smooth performance and quick start, so that you do not lose time at the job site. The unit comes with four 120 volt (20 amp) and one 120/240 volt (50 amp) receptacles with circuit breakers. The Hobart Welders 500434A is rugged and is equipped The enclosed engine design and a large battery in a heavy duty construction make this welder durable and rugged. The unit weighs 10-20% less than its counterparts that makes it easy to port The standard hour meter is useful to schedule routine oil servicing checks. The 10 gallon tank proves useful during its extended run time. Hobart Handler 500501 Factory Reconditioned "B Grade" 180 Mig Welder The Hobart Handler 500501 is a factory reconditioned B stock portable MIG welder. In a single pass the Hobart Handler 500501s powerful output welds 24 gauge materials up to 5/16 inches. The replaceable, built in contactor ensures ease of use and safety as it makes the welding wires electrically cold when not in use. The polarity changeover checks the polarity of switches and changes polarity to ensure user safety. The quick-change dual groove drive rolls enable easy change of wire diameter between 023-.025 in (0.6 mm) and .030 - .035 in (0.8 - 0.9 mm) wire. The self-resetting thermal overload makes the welder all the more reliable as it maintains the heat to the optimum level and protects the power transformer from overload outages. Four output voltage with wire feed control enable fine-tuning with less spatter. Hobart Welders 500500 Factory Reconditioned Handler 140 "B" Stock MIG Welder, 25 -140 Amps The Hobart Welders 500500 is a powerful and versatile B stock 140 MIG Welder. Powered by 115 volts of household current, this factory reconditioned welder has an out put range of 25 - 140 Amps. The wire feed speed tracking with 4 output voltage makes for quick adjustment of settings as per the different material as well as their thickness. This enables easy operation and fast job site performance. The wire has an electric cooling feature that cools the tool fast during idle time thus ensuring user safety. Besides, self resetting thermal overload protects the tool from toughest applications and electricity overload. In a single pass, the Hobart Welders 500500 welds 24 gauges of steel up to inch thickness, making heavy duty job done fast. Efficient to shield with or without shielding gas this welder efficiently handles aluminium wires, flux cordes and solid mild stainless steel. The welder also has a convenient polarity changeover with storage holes for spare tips. The built in wire feeder with quick release drive roll lever provides positive feed with adjustable tension and also provides easy access for threading wires. |
